401 not categorized PORSCHE 944S IMS CHECKCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 TURBO/GT2 2007-09 - Body (includes uncategorized and accessory items) 964564201007EQ This is the perforated sunroof lining, it is made in Germany with original material. It is as close to the original as possible and is cut and trimmed to fit perfectly. This part replaces original part # 964 564 201 007 00 sold individually. 1 necessary per car.
$127.60
Make a selection 911561051012EQ This is the top outer section of the cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion, increased fade resistance and the tighter woven layers are made for modern electric tops with stronger frames for the 911 and 964. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. Made in Germany. This would replace original part # 911 561 051 012xw sold individually. 1 necessary per car. Only f...(choose a part on the right to read more)
$1,141.80
Make a selection 911606105DXATK The warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary between 6-8 weeks. Sold individually. 1 necessary per car.
$744.70
Make a selection 911561050002FA1 We go to extra lengths to ensure that our linings are as similar to the originals as possible. Each is cut and trimmed to fit perfectly. Replaces original part # 911 561 050 002 fx made in Germany. Sold individually. 1 necessary per car. Please note: specific model fitment below.
$177.10
Make a selection 911561023003EQ This is a complete cabrio top cover made in Germany with original material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes all of the original tenax snaps / retainers in the original locations. This would replace original part # 911 561 023 003 av made in Germany. Sold individually. 1 necessary per car. Please note: if you own a 1986-89 model please see our part # 911561023602eq
$873.40
Make a selection 93035104803EQ The zimmermann OEM brake disc combines high-quality cast materials, a vented and perforated braking surface and includes z-coating. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Sold individually. 1 necessary per car. Rotors should always be changed in pairs; the front left is part # 93035104703eq please note: if you are looking for a kit with pads, etc. Please check our brake service kit selection.
$237.60
Make a selection 93060610500ATK The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, clean, degrease and rebuild to factory specifications. Remanufacturing is done in Germany, so the lead times can vary. Send us your original warmup regulator and we will have it remanufactured for you. We do not offer a core exchange on this part. Please note: please package your part as carefully as possible to ensure that damage is not caused en route to us.
$744.70
Make a selection 93035104703EQ The zimmermann OEM brake disc combines high-quality cast materials, a vented and perforated braking surface and includes z-coating. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Sold individually. 1 necessary per car. Rotors should always be changed in pairs; the front right is part # 93035104803eq please note: if you are looking for a kit with pads, etc. Please check our brake service kit selection.
$237.60
Make a selection 92834102833ATK By ordering this part number you get after previous sending in your wishbone overhauled with new silent blocs back. Should it not be repairable, we will inform you immediately.
$342.10
Make a selection 93010398306SET6 High-quality OEM replacement piston and cylinder set designed to perform like the original. We source these parts in Germany to ensure quality, reliability and precise fitment. Set includes: 6 qty. Pistons 6 qty. Cylinders 6 qty. Wrist pins 12 qty. Circlips 1 qty. Set of piston rings sold as a set. 1 necessary per car. Now is the perfect time to upgrade for added performance! We carry mahle 3.2 l slip fit, larger bore, higher compression pistons and cylinders, part # 10010303204
$5,781.04
Make a selection 95011681306 This guide tube works in conjunction with a 32 mm release (throw-out) bearing. Exact dimensions: id 27.1mm od 31.9mm length 49mm weight: .286 lbs. (.13 kg) View/Change Diagram
From $57.51
Make a selection 92811014711EQ Today's fuel has a myriad of oxygenate additives to comply with more strict emissions standards. These additives can be detrimental to your investment. Certain additives can break down rubber components in the fuel system. Others like ethanol are hygroscopic, so they absorb water. Ethanol is also an alcohol, so it tends to clean out more impurities which tends to foul the fuel filter far more quickly than fuels of the past. So, keeping the above in mind, we suggest replacing your fuel filter far more regularly. This is a high-quality replacement filter sourced directly from Germany. Sold individually.
$52.80
Make a selection 91151192302EQ1 This gasket sits on the inside of the hood in the front trunk. It tends to get nicked and cut and will degrade with time. It is essential to keep moisture out of the trunk and should be replaced at the first signs of damage. This is a high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$136.40
Make a selection 9115555050101EQ We go to extra lengths to ensure that our linings are as similar to the originals as possible. Each is cut and trimmed to fit perfectly. Replaces original part # 911 555 505 01 05t made in Germany. Sold individually. 1 necessary per car.
$94.60
Make a selection 930602015AX2ATK Send us your distributor and we will remanufacture it for you. A perfect option for those who have time and want to save on costs. The remanufacturing process includes full inspection, disassembly, cleaning and degreasing. We then install a toothed timing belt (part # FVD 602 964 00) and a distributor pinion pin (part # 930 602 922 00). Clearances, timing and proper operation are then checked to ensure reliability. Please note: each distributor is remanufactured in Germany, so the lead times can vary.
$504.11
Make a selection 93035204501EQ The zimmermann OEM brake disc combines high-quality cast materials, a vented and perforated braking surface and includes z-coating. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Made in Germany. Sold individually. 1 necessary per car. Rotors should always be changed in pairs; the rear right is part # 93035204601eq
$237.60
Make a selection 93050306800 Steel, prime coated quarter panel extension, made by dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$244.20
Make a selection 96534703200SP We are committed to Porsche cars and are very happy to release an outer tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM part number, 965 347 032 00. Sold individually. 2 needed per car. We also suggest replacing your inner tie rod, we have a uniball option, our part # 96434705805sp (qty. 1 is needed) and now is also a good time to replace your worn out inner tie...(choose a part on the right to read more)
$251.90
Make a selection 95B615301MSPORT Die zimmermann sport-bremsscheibe wurde auf basis der erfahrungen von serienfahrzeug-bremsscheiben in verbindung mit dem motorsport entwickelt.durch die kombination hochwertiger gussmaterialien mit einer gelochten bremsflache wird eine optimierung des bremssystems erzielt.die vorteile: besseres nassbremsverhalten bremsstaub und wasser werden permanent abgefuhrt sportlichere optik spurbare verbesserung der bremsleistung ihres fahrzeuges bremsenfading wird vermieden die ansenkung der bohrungen dient gleichzeitig als verschleissanzeiger austausch der originalscheibe 1:1 moglich
$176.00
Make a selection 95B615601GBZ Die zimmermann bremsscheibe black z wurde auf basis der erfahrungen von serienfahrzeug-bremsscheiben in verbindung mit dem einsatz im rennsport, speziell in der vln, entwickelt. Die bremsperformance erfullt die hohen anspruche aus dem rennsport und kann nun auch im strassenbetrieb erlebt werden. Wie bei allen zimmermann-scheiben werden auch hier nur hochwertigste gussqualitaten eingesetzt. Die vorteile:•schnelleres ansprechen der bremse durch die optimierte ableitung von wasser •besseres nassbremsverhalten •gebrauchsmuster geschutztes nutbild sorgt fur optimale warmeableitung und damit verbesserung der bremsleistung •bremsenfading wird vermieden •coolere optik •bessere optik ...(choose a part on the right to read more)
$185.90
Make a selection 95B615601GSPORT Die zimmermann sport-bremsscheibe wurde auf basis der erfahrungen von serienfahrzeug-bremsscheiben in verbindung mit dem motorsport entwickelt.durch die kombination hochwertiger gussmaterialien mit einer gelochten bremsflache wird eine optimierung des bremssystems erzielt.die vorteile: besseres nassbremsverhalten bremsstaub und wasser werden permanent abgefuhrt sportlichere optik spurbare verbesserung der bremsleistung ihres fahrzeuges bremsenfading wird vermieden die ansenkung der bohrungen dient gleichzeitig als verschleissanzeiger austausch der originalscheibe 1:1 moglich
$129.80
Make a selection 96433102200RATK Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)
$672.10
Make a selection 96434101807AT By ordering this article number, you will receive a reconditioned wishbone with newly pressed-in bearings. The calculated replacement deposit will be returned to you as soon as the old part has been received and checked. This item is also available with race bearings (85 shore).article number FVD 341 018 07at the reconditioning process includes full inspection of each track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. If your old part is not repairable we will inform y...(choose a part on the right to read more)
$418.00
Make a selection 96434101807ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can be made for...(choose a part on the right to read more)
$418.00
Make a selection 96434307281ATK Looking for a more cost-effective solution than ordering a new link? Let us recondition your original drop link. The reconditioning process includes full inspection, disassembly, degreasing and media blasting. Once fully prepared, we properly install new bushings, finish with a corrosion proof coating and include a new lock nut. Please note: each link is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your link we will notify you as soon as we can. Arrangements can be made for its return to you. Sold individually. 1 necessary per car.
$194.70
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |